Hempel Clean & Shine
APPLICATION DETAILS:
PREPARATION: Rinse the surface with fresh water to remove loose dirt.
APPLICATION CONDITIONS: Do not expose to frost. The surface temperature must be above: 5 ° C. FOLLOWING PAINTING: If high gloss is desired, apply: HEMPEL'S CUSTOM MARINE POLISH 67444. Finish with: HEMPEL'S WAX 69033 or HEMPEL'S WAX TecCel 69034.
APPLICATION CONDITIONS: Shake thoroughly before use. Dilute 1 part of the product with 10-50 parts fresh or sea water. In case of more severe pollution, a lower mixing ratio is used. Apply the product to the surface with a sponge, soft brush or cloth. In vertical areas wash the surface in stages starting from the highest point until all dirt is removed. Rinse with fresh water to remove any residue. Let the surface dry ..
HEMPEL's CLEAN & SHINE 69003 is a concentrated detergent that cleans and leaves a protective film in the same treatment.
To remove dirt, stains, surface layers that are broken by UV light, and other typical impurities on gelcoat, painted and painted surfaces, leaving a protective wax film.
PRODUCT DATA:
Color: Light yellow
Density: 1.1 kg / liter
Flash point: None
pH: 11 (undiluted)