Control cables
ULTRAFLEX control cables are made of plastic R / F steel with steel wire cable and stainless steel extension arm. Resistant to ultraviolet light and saline.
Unique flexible and always smooth running. Complies with ISO 9000 and EN 29000. Approved by the Norwegian Board and Yacht Council.
As well as CE approved.
Lgd. = A + B + C minus 10 cm for each 90˚ bend + 30.5 cm for mounting on the engine.
Example: A = 50 + B = 250 + C = 80 minus 20 cm for 2 pcs. 90˚ bends = 360 + 30.5 cm = 390.5 cm
390.5 cm: 30.5 = 12.8 feet. A 13-foot cable must therefore be selected
Length = A + B + C minus 10 cm for each 90˚ bend.
Example: A = 50 + B = 250 + C = 80 minus 20 cm for 2 pcs. 90˚ bends = 360 cm
360 cm: 30.5 = 11.8 feet. A 12-foot cable must then be selected
Orders of lengths:
"D" dimension + 56 cm.
Ordering lengths in foot is divided by 30.5 and rounded up to the nearest whole foot. For example: D - 305 cm + 56 cm = 361: 30,5 = 11,8 "round up to 12 feet. 
Cable type and length are always printed on the external cable.
The length is in foot (305 mm) and measured from the attachment point in the control box to the end of the extension arm half-pulled.