Hempel Thinner 845 (No 5)
HEMPEL paints are produced and delivered in such a way that dilution will not usually be necessary if the paint is properly mixed / stirred up. However, if the paint is applied to a low layer thickness (eg as a sealer coat) or if paint has become too thick, for example at low temperatures, the HEMPEL THINNER specified on the product data sheet may be added to obtain suitable application properties. In general, dilution should be kept to a minimum as the quality of the paintwork will be affected by too much dilution. However, if painting is to take place at high temperatures (air and / or steel), it may exceptionally be necessary to dilute beyond the limits stated on the product data sheet to avoid dust / drizzle and poor film formation. HEMPEL's diluents are composed in such a way that the best results are achieved for the prescribed applications in terms of extensibility, spray properties, etc. In some cases, ordinary merchandise can be used as replacement. However, as such products are not under our control, this falls outside our area of responsibility.
Tool cleaning: Tools can usually be cleaned with the diluent prescribed for that product.
HEMPEL'S THINNER 845 (No. 5) 08451
Thinner and tool cleaning for HEMPEL's LIGHT PRIMER 45551.
Exclusive tool cleaning for HEMPEL's HIGH PROTECT 35651.
Density: 0.9 kg / liter
Flash point: 26 ° C